Sangean PS-300
Pillow Speaker
-
Listen to Audio Devices with comfort and privacy
-
In-Line Volume Control
-
Built-in Power Amplifier to Enhance the Audio Output Level
-
Switch Off Built-in Amplifier To Power Speaker Directly
Volume
Adjust to desired audio output level Amplifier on / off: switch on to increase audio output level
Note
-
Install one aaa / um-4 / r3 battery (battery not included) to power the optional internal audio amplifier only connect to headphone jack, as connection to higher output speaker connection will cause damage.
-
Requires stereo earphone output. Not compatible with PR-D4 and PR-D7 (mono earphone output).
-
Speaker 57mm 16 ohm 50mW full range Amplifier output power Typical 50mW 16 ohm Input impedance 200 ohm Frequency response 100Hz ~20kHz Maximum input power 50mW (amplifier OFF) Input sensitivity 500mVrms Output Devices Speaker Size 57mm Mylar Impedance 16 ohm Magnetically Shield Yes Output Power Typical Batteries (Speaker) 30 mW Power Supply Batteries (Main Power) SUM - 4 x1 I/O Socket input cable and plug 3.5 mm (D) 2 metre stereo cable Dimensions W x H x D (mm) 70 x 86 x 14.5 Weight (g) 90 Particular Performance Length of the cable (mm/inch) 1200 / 47.24 2 Volume control 3 Bypass headphone & Booster Warranty 12 months
$39.95
Analogue Radio Range
